B2D2 - The Better Beer Dispensing Device

Nope, it doesn't look anything like R2D2, but the 4 tap draft box is FINISHED!!!!!!!!!!!!!!!! Here she is in all her 4 tap glory!

The collar that started it all.













The freezer fitted with a collar for the bottom to raise the unit up to acceptable (for me) pouring height, and for the top for the taps to fit through. I also added non-marring casters so it could roll around the house without scuffing up the floor.

















1x3s installed to secure the freezer to the collars to the freezer, create airflow between the freezer and the outside plywood, and to be used as nailers for the plywood.













Skinned with 1/4" plywood and dry fitted with taps and CO2 distribution unit.


















An inside peek before all of the hoses are installed.














Building the top.













After the stain and first coat of varnish is applied.

















The finished unit sans drip tray (that will come next month).


































Yes, I know that's a crappy ol' staining job but the drip tray will sit right at the bottom of those stain lines so I'm hoping it will mask it some.

Three of the taps are pouring Scottish Wee Heavy, Red Ale, and Pale Ale. Yippee!